Star Micronics TSP400 Series, Programmer'S Manual

Page: 7 / 136

– 4 –
3-1. LED
LED Function
POWER Lights up when the printer is turned on
HEAD UP
NO PAPER
Lights up when an error occurs (Refer to 6-1 Errors.)
ERROR
ON LINE
Lights up when the printer is on line; goes off when the printer
is off line; lights up when the head temperature is too high
3-2. Switches
Switch Function
ON LINE Switches between on line and off line
FEED Enable starting position: Feeds the paper to the next starting
position
Disable starting position: Feeds the paper while pressed
3-3. Power switch and ON LINE/FEED switch combinations
The following can be set when the power switch is turned on.
1) Power + FEED switches
1 short beep … Test print
HEAD UP LED lights up
2) Power + ON LINE switches
Approx. 2 sec. Approx. 2 sec.
1 short beep … 2 short beeps … 3 short beeps …
a b c
HEAD UP LED NO PAPER LED ERROR LED
lights up lights up lights up
Pause at a: HEX dump
Pause at b: sensor selection
Press ON LINE 1 short beep Reflecting sensor
Press FEED 2 short beeps Transmissive sensor
3. DISPLAY PANEL AND FUNCTIONS