Star Micronics TSP400 Series, Programmer'S Manual

Page: 81 / 136

– 78 –
LINE MODE
FUNCTION
Vertical tab
CODE <VT>
HEX
0B
REMARKS
When start position detect is invalid, feeds the paper to the next
vertical tab stop and moves the print position to the left margin.
Performs a line feed if no vertical tabs are set or if the current line
is at or below the last vertical tab stop.
Same as <LF> when start position detect is valid.
FUNCTION
Set line spacing to 4 mm
CODE
<ESC> “z” “1” or <ESC> “z” <1>
HEX
1B 7A 31 or 1B 7A 01
REMARKS
Sets the distance the paper advances in subsequent line feeds to
4 mm.
FUNCTION
Set line spacing to 3 mm
CODE <ESC> “0”
HEX
1B 30
REMARKS
Sets the distance the paper advances in subsequent line feeds to
3 mm.
FUNCTION
One time n/4 mm feed
CODE
<ESC> “J” n
HEX
1B 4A n
REMARKS
Performs a line feed of n/4mm once only.
The value of n is 1 to 255.
Space setting for lines is not changed.