Star Micronics TSP400 Series, Programmer'S Manual

Page: 50 / 136

– 47 –
PAGE MODE
Data HEX Condition
<SOH> <STX> “FI” <ETX> <EOT> <CR> <LF> 01 02 46 49 03 04 0D 0A Printing fin-
ished
<SOH> <STX> “OF” <ETX> <EOT> <CR> <LF> 01 02 4F 46 03 04 0D 0A Printer off-line
<SOH> <STX> “PR” <ETX> <EOT> <CR> <LF> 01 02 50 52 03 04 0D 0A Printing in
progress
<SOH> <STX> “RE” <ETX> <EOT> <CR> <LF> 01 02 52 45 03 04 0D 0A Ready
<SOH> <STX> “E1” <ETX> <EOT> <CR> <LF> 01 02 45 31 03 04 0D 0A System error
<SOH> <STX> “E2” <ETX> <EOT> <CR> <LF> 01 02 45 32 03 04 0D 0A Head up
<SOH> <STX> “E3” <ETX> <EOT> <CR> <LF> 01 02 45 33 03 04 0D 0A Paper empty
CODE <SOH> <STX> “E2” , “E3” <ETX> <EOT> <CR> <LF>
HEX 01 02 45 32 2B 45 33 03 04 0D 0A
n1n2 Country
00 U.S.A
01 France
02 Germany
n1n2 Country
03 UK
04 Denmark #1
05 Sweden
n1n2 Country
06 Itary
07 Spain #1
08 Japan
n1n2 Country
09 Norway
10 Denmark #2
11 Spain #2
n1n2 Country
12 Latin America
Note: When more than one printer condition exists, the printer
sends each status byte separated by a comma.
Head up, and paper empty: <SOH> <STX> “E2”,“E3”
<ETX> <EOT> <CR> <LF>
EXAMPLE
LPRINT CHR$(&H05);
If the printer is in a condition of “Head up, paper empty” then the
printer returns the following codes to the host.
FUNCTION
Select international character set
CODE
<ESC> “N n1n2” <LF><NUL>
HEX
1B 4E n1n2 0A 00
REMARKS
This command defines temporary change of the international
character set.
For permanent change of the international character set, change
memory switch settings by using<ESC> “#”.
EXAMPLE
Select Spain #2 Character set.
LPRINT CHR$(&H1B);“N11”;CHR$(&H0A);CHR$(&H00);