Star Micronics TSP400 Series, Programmer'S Manual

Page: 64 / 136

– 61 –
LINE MODE
8. CONTROL CODES/LINE MODE
8-1. Line Mode Command Summary
The details of each command are shown in the following sections.
Commands to Select Characters
Control codes
Hexadecimal
Function Page
codes
<ESC> “R” n 1B 52 n Select international character set 65
<ESC> “/” “1” 1B 2F 31
Select slash zero
65
<ESC> “/” <1> 1B 2F 01
<ESC> “/” “0” 1B 2F 30
Select normal zero
65
<ESC> “/” <0> 1B 2F 00
<ESC> “b” n1 n2 n3 n4 1B 62 n1 n2 n3 n4 Select bar code printing 66
d1 ... <RS> d1 ... 1E
<ESC> “M” 1B 4D Select 12-dot pitch printing 70
<ESC> “p” 1B 70 Select 14-dot pitch printing 70
<ESC> “P” 1B 50 Select 15-dot pitch printing 70
<ESC> “:” 1B 3A Select 16-dot pitch printing 70
<ESC> <SP> n 1B 20 n Set character spacing 70
<SO> 0E Sets the printing magnified double in 71
character width.
<DC4> 14 Resets the printing magnified in 71
character width.
<ESC> “W” n 1B 57 n Sets the magnification rate in character width. 71
<ESC> <SO> 1B 0E Sets the printing magnified double in 71
character height.
<ESC> <DC4> 1B 14 Resets the printing magnified in character 71
height.
<ESC> “h” n 1B 68 n Sets the magnification rate in character height. 72
<ESC> “i” n1 n2 1B 69 n1 n2 Sets the magnification rates in character 72
width and height.
<ESC> “–” “1” 1B 2D 31
Select underlining
72
<ESC> “–” <1> 1B 2D 01
<ESC>“–” “0” 1B 2D 30
Cancel underlining
72
<ESC> “–” <0> 1B 2D 00
<ESC> “_” “1” 1B 5F 31
Select upperlining
73
<ESC> “_” <1> 1B 5F 01
<ESC> “_” “0” 1B 5F 30
Cancel upperlining
73
<ESC> “_” <0> 1B 5F 00