Star Micronics TSP400 Series, Programmer'S Manual

Page: 99 / 136

– 96 –
LINE MODE
EXAMPLE 3
LPRINT CHR$(&H1B);“#2,0001”;CHR$(&H0A); CHR$(&H00);
LPRINT CHR$(&H1B);“?”;CHR$(&H0A); CHR$(&H00);
Cutter: Invalid
Printing speed: 25 mm/sec
Note: In order to enable the changed memory switch setting, turn the printer OFF
and ON again or send the printer reset command (<ESC>“?”) to the printer.
FUNCTION
Initialize printer
CODE
<ESC> “@”
HEX
1B 40
REMARKS
Reinitializes the printer. Clears the print buffer and returns settings
to their power-up values.
Does not clear the input buffer, downloaded characters, or condi-
tions for peripheral devices.
FUNCTION
Enquiry
CODE <ENQ>
HEX
05
REMARKS
Causes the printer to transmit a status byte (except in STX-ETX
mode).
When this command is received after text data in STX-ETX mode,
the printer transmits the status and check bytes.