Star Micronics TSP400 Series, Programmer'S Manual

Page: 97 / 136

– 94 –
LINE MODE
FUNCTION
Set memory switch
CODE <ESC> “# N , n1n2n3n4” <LF> <NUL>
HEX
1B 23 N 2C n1n2n3n4 0A 00
REMARKS
Set the memory switch. In order to enable changed memory switch
setting, turn the printer OFF and ON again or send printer reset
command (<ESC> “?”) to the printer. Changed memory switch
settings are stored in EEPROM and these setting will be stored as
long as the time when they are changed again.
N
:Memory switch number (1 or 2)
n1n2n3n4 :Mode settings (For details see below)
1) Use N=1 to set printer conditions. Parameters are follows.
n1 :Sensor select
n2 :Start-position detect
n3 :Zero style
n4 :International character set
Parammeter
n1
n2
n3
n4
Setting
Sensor select
Start-position delect
Zero style
International character set
(Default)
0
Reflective sensor
(Black mark)
OFF
Normal zero
1
Transmissive sensor
ON
Slashed zero
See below
n4 Country
0 USA
1 France
2 Germany
n4 Country
3 UK
4 Denmark #1
5 Sweden
n4 Country
6 Itary
7 Spain #1
8 Japan
n4 Country
9 Norway
A Denmark #2
B Spain #2
n4 Country
C Latin America
2) Use N=2 to set option-related settings. Parameters are as follows.
n1 :Always “0” (TSP400)
n2 :Cutter installed status
n3 :Always “0”
n4 :Printing speed
n Setting 0 1
n2 Cutter Invalid (TSP412) Valid (TSP442)
n4 Printing speed 50 mm/sec (Default) 25 mm/sec