Star Micronics TSP400 Series, Programmer'S Manual

Page: 65 / 136

– 62 –
LINE MODE
Control codes
Hexadecimal
Function Page
codes
<ESC> “4” 1B 34 Select highlight printing 73
<ESC> “5” 1B 35 Cancel highlight printing 73
<SI> 0F Inverted printing 73
<DC2> 12 Cancel inverted printing 73
<ESC> “E” 1B 45
Select emphasized printing
74
<ESC> “G” 1B 47
<ESC> “F” 1B 46
Cancel emphasized printing
74
<ESC> “H” 1B 48
Commands to Set the Page Format
Control codes
Hexadecimal
Function Page
codes
<ESC> “C” n 1B 43 n Set page length in lines 75
<ESC> “C” <0> n 1B 43 00 n Set page length in inches 75
<ESC> “N” n 1B 4E n Set bottom margin 75
<ESC> “O” 1B 4F Cancel bottom margin 75
<ESC> “l” n 1B 6C n Set left margin 76
<ESC> “Q” n 1B 51 n Set right margin 76
Commands to Move the Print Position
Control codes
Hexadecimal
Function Page
codes
<LF> 0A Line feed 77
<CR> 0D Carriage Return 77
<ESC> “a” n 1B 61 n Feed paper n lines 77
<FF> 0C Form feed7 77
<HT> 09 Horizontal tab 77
<VT> 0B Vertical tab 78
<ESC> “z” “1” 1B 7A 31
Set line spacing to 4 mm 78
<ESC> “z” <1> 1B 7A 01
<ESC> “0” 1B 30 Set line spacing to 3 mm 78
<ESC> “J” n 1B 4A n One time n/4 mm feed 78
<ESC> “j” n 1B 6A n One time n/4 mm backfeed 79
<ESC>“I” n 1B 49 n One time n/8 mm feed 79
<ESC> “B” n1 n2 ... <0> 1B 42 n1 n2 ... 00 Set vertical tab stops 79
<ESC> “D” n1 n2 ... <0> 1B 44 n1 n2 ... 00 Set horizontal tab stops 80