Section 4: Software Commands
Page 4-4
NetClock/GTP Instruction Manual
4.2
DISPLAY OUTPUT CONFIGURATION
The command,
CONF
, displays the current settings for the clocks outputs. To view the
output configurations, issue the
CONF
command as shown below:
Type:
CONF<ent>
Default
response:
FRONT PANEL FORMAT= 24 HOUR
TIME DIFF= +00:00 DST= 0
IRIG FORMAT= FAA
TIME DIFF= +00:00 DST= 0
SERIAL PORT 1
BAUD RATE= 9600 FORMAT #= 00 REQUEST CHAR= T
TIME DIFF= +00:00 DST= 0
SERIAL PORT 2
BAUD RATE= 9600 FORMAT #= 00 REQUEST CHAR= T
TIME DIFF= +00:00 DST= 0
REMOTE PORT 1
BAUD RATE= 9600 FORMAT #= 00
TIME DIFF= +00:00 DST= 0
