Section 4: Software Commands
NetClock/GTP Instruction Manual
Page 4-19
4.11 IRIG
CONFIGURATION
The command,
IRIG
, reads and sets the IRIG output configuration. IRIG time can be
set for UTC or local time with or with DST corrections. The current IRIG output
configuration can be viewed using the
IRIG
command as shown below:
Type:
IRIG <ent>
Default Response:
IRIG FORMAT= FAA
TIME DIFF= +00:00 DST= 0
To change the IRIG output configuration, place the clock in
Set Mode
and issue the
appropriate
IRIG
command shown below.
Type:
IRIG [TD] [DST] <ent>
Where:
TD
= Time difference from UTC, ± 00:00...±12:00, refer to
Figure 4-2, UTC Time Difference Map.
DST
= DST Rule Number, 0...6.
Where: 0 = No DST, always Standard Time
1 = North America
2 = United Kingdom
3 = Continental Europe
4 = China
5 = Australian 1
6 = Australian 2
Example:
Set the IRIG port for Eastern time with automatic DST corrections.
Type:
SM ON <ent>
Response:
SET MODE ON
Type:
IRIG -05:00 1
Response:
IRIG FORMAT = FAA
TIME DIFF = -05:00 DST = 1
