Section 4: Software Commands
NetClock/GTP Instruction Manual
Page 4-25
NOTES
: A once-per-second output is enabled when the request
character is set for
NONE
.
The time contained in data formats 02, 04, and 90 always reflect
UTC time. The time difference parameter in the Serial Comm
configuration command has no effect on output time.
Example: Configure Serial Comm 1 to respond with data format 03 whenever a ? is
received. Set the bit rate at 4800 Baud and time reflecting Pacific
Standard time (no DST corrections).
Type:
SM ON <ent
>
Response:
SET MODE ON
Type:
SER1 4800 03 ? -08:00 0 <ent>
Response:
SERIAL PORT 1
BAUD RATE = 4800 FORMAT # = 03 REQUEST CHAR = ?
TIME DIFF = -08:00 DST = 0
