1.1
Upgrade the BASIC mode to ADVANCED mode
The CMPC has two operating modes
– Basic and Advanced mode. In Basic mode, users only can
monitor 16 remote DVR servers. With the Advanced mode, users can monitor up to 1000 remote DVR
servers.
Please follow the below steps to upgrade the CMPC from Basic mode to Advanced mode.
1.
Call your local distributor and purchase a copy of the ADVANCED license or download the BASIC
mode from the Internet.
Your local distributor will then issue you with a Password. (If you have purchased the ADVANCED
mode CD, this password is located on the CD sleeve itself).
The Password is only valid for one time and is tied to the PC hardware. Do not release the
password to any third party.
Run the CMPC program.
Click the exit button 'x' on the upper right corner of the CMPC main screen.
Click
About
→
Register
(also see
3.2 # 1
)
On the
Register
dialog box, note down the Activation number. Send both the Activation number
and Password to your distributor.
Your distributor will then issue you with a Serial Key, which is tied to Activation number.
Go back to the
Register
screen and fill in the serial number from the distributor to upgrade the
CMPC to ADVANCED mode.
The BASIC mode and ADVANCED mode only differs in the number of DVR servers that
can be monitored at the same time. You have the same functionalities on both products.
Dual Monitors setting
Video configuration is different for each different VGA chipsets. Please follow the steps below to
setup the dual monitors display.
1.2.1
Graphic card with ATi chipset
1.
Enter the ATI Catalyst Control Center, user can click the short-cut or right click on the screen.
2.
There are two modes to select
─
Basic and Advanced.
2
2.
3.
4.
5.
6.
7.
8.
9.
i
1.2
