System Controller
– To configure the parameters that is for communicating with the
System Controller (an optional accessory). Also please refer to Using System Controller or
user manual of the System Controller.
Click
Setting
to configure system controller.
Enable
– Mark the check box to enable the System Controller function.
Model
– Select model of the System Controller.
Port
– Select the com port that is connected with the System Controller. Click
Setup
to
configure com port value. The com port value is shown in below table:
Baud rate
9600
Data bits
8
Parity
No
Stop bit
1
Flow control
No
ID
– Set an ID for DVR server (0~99). This ID is a key for communicating between the
Controller and the DVR server.
When the DVR server ID is X, the DVR server can be controlled by System
Controller irrespective of the DVR ID that is selected in System Controller.
32
System
i
