Alarm Setting
click
Add
to insert and set new alarm setting, click
Delete
to remove the selected alarm setting, click
OK
to exit and save the setting,
Cancel
to exit without saving, and
Default
to revert back to original
factory setting.
(1)
(2)
(3)
(7)
(4)
(5)
(6)
To set the Alarm Setting:
1.
Click
Add
to insert and set a new alarm setting. Click the items in the
(7) Alarm Setting List
, if
you want to modify the alarm setting.
2. In
(1) Alarm Setting number/Name/Description
,
display the selected alarm setting number in the
list below. Enter alarm name and description.
3. In
(2) Enable Time
,
the number from 00 to 23 represent the time in 24-hour clock. Select the time
and click the block you want to activate or deactivate the alarm function. When it is deactivated
the color of the block turns white.
4. In
(3) Conditions
, you can
set “
Trigger if any
” to activate if it falls to one of the conditions or
“
Trigger if all
” to activate if it falls to all conditions.
- In Camera section, select and click on the camera number (01 to 16) in
Motion Detected
and
Video Loss
to set the condition for the system to alarm.
- In
Missing and Suspicious Object Detected
, click the camera number (01 to 16) and select
the certain object on the screen (right click on camera number for detailed setting)), and when
the certain object is missing or doubtful, the system will alarm. In
Scene Change
, when the
camera has been moved, the system will alarm, too.
- In
Voice Detection
, click the camera number (01 to 16) to the system to alarm when detect the
abnormal voice.
5. In
(4) Sensor
, select and click on the sensor number (use
and
to select the sensor) to set the
condition for the system to alarm. If the sensor normal status is high, set the sensor condition to
low .
- Enable/disable the
Abnormal Event
check box, to set the condition of the event for system to
alarm.
•
Normal Reboot:
when the DVR system reboot without abnormal condition, the system will
send out the alarm message.
24
