Sony NAS-Z200DIR Operating Instructions Manual Download Page 73

Page: 73 / 84

NAS-Z200DiR/Z200iR.GB.4-151-738-

(1)

Precautions/Specifica

tions

Secure the Base Plate to the wall using 4 or more 6 mm diameter or equivalent

screws (not supplied).

Select 4 screw holes with the



mark shown in the diagram below and tighten the screws securely so

that they will not become loose.

Secure the Base Plate so that it is level.

Base Plate

WARNING



The screws required for this procedure are not supplied. Select screws suitable for the material and structure of

the wall.



If the Base Plate cannot be attached securely enough, use additional screws.



Be sure to confirm that the Base Plate is securely attached to the wall.

Detach the stand from the unit.



Remove the 2 screws that secure the stand from the unit.



Push the 2 tabs located on the bottom of the stand, and pull up the stand to detach from the
unit.

Soft cloth

Note

Do not remove the stand for any reason other than to wall-mount the unit.

Summary of Contents for NAS-Z200DIR





















































































Search results

Summary of Contents for NAS-Z200DIR

Reviews:

Related manuals for NAS-Z200DIR

Brands by name

Popular brands

Sony NAS-Z200DIR, Operating Instructions Manual

Search results

Summary of Contents for NAS-Z200DIR

Reviews:

Related manuals for NAS-Z200DIR

Brands by name

Popular brands