![background image](http://html.mh-extra.com/html/sony/nas-z200dir/nas-z200dir_operating-instructions-manual_1330164050.webp)
NAS-Z200DiR/Z200iR.GB.4-151-738-
12
(1)
0
GB
HOME
/
/ENTER
BACK
Changing the display
brightness
You can change the brightness of the display on the
remote control.
1
Select [Settings] from the Home
menu.
2
Select [Remote Control] –
[Brightness].
3
Set a brightness level of 1 to 5.
The factory setting is level 3. “1” is the
brightest level and “5” is the darkest.
To cancel the procedure
Press HOME.
To go back to the previous status
Press BACK.
Changing the remote control settings
Changing the backlight
status
You can specify how long the display backlight
stays on when the remote control is on or off the
charger.
To set the backlight status when the
remote control is on the charger
1
Select [Settings] from the Home menu.
2
Select [Remote Control] – [Backlight
Timer].
3
Select [On-charger].
4
Select [Always On] or [Auto Off (60sec)].
Always On
The backlight stays on all
the time.
Auto Off
(60sec)
The backlight turns off when
no operation is performed
for 60 seconds.
(
: Factory setting)
Notes
[Always On] is selectable only when the remote control
is placed on the charger.
If the automatic demonstration is set to [On] and
the backlight timer is set to [Auto Off (60sec)], the
demonstration starts playing when 60 seconds is
elapsed and the backlight does not turn off.