![background image](http://html.mh-extra.com/html/sony/nas-z200dir/nas-z200dir_operating-instructions-manual_1330164046.webp)
NAS-Z200DiR/Z200iR.GB.4-151-738-
12
(1)
GB
HOME
/
/ENTER
BACK
+/–
Using the Sleep Timer
You can set the Sleep Timer so that the unit enters
standby mode automatically after a certain period
of time (Sleep Timer function). This function
operates even if the clock is not set.
1
Select [Settings] from the Home
menu.
2
Select [Sleep Timer].
3
Select the time interval.
You can select the interval from [Off]*
1
, [10
minutes], [30 minutes], [60 minutes], or [90
minutes].
*
1
Factory setting
After the selected time elapses, the unit enters
standby mode automatically.
To cancel the procedure
Press HOME.
To go back to the previous display
Press BACK.
Tips
You can set the Sleep Timer even when a function is
selected. Press OPTIONS during any function to enter
the Options menu, select [Sleep Timer], and then select
the time interval.
If you set both Sleep Timer and Play Timer at the same
time, the Sleep Timer takes priority.
Note
If you perform the following operations before the Sleep
Timer goes off, the Sleep Timer resets.
Disconnect the power cord.
Turn off the unit.
Select [Settings] from the Home menu and perform
[Common Setting] – [System Reset].
Using the timer