![background image](http://html.mh-extra.com/html/sony/nas-z200dir/nas-z200dir_operating-instructions-manual_1330164054.webp)
NAS-Z200DiR/Z200iR.GB.4-151-738-
12
(1)
GB
VAIO Media plus
The installation was not successful.
The OS does not support this software (page 16).
There is not enough free space on your hard disk
(page 16).
The installation appears to have stopped before
completion.
Check for an error message underneath the
installation window.
The VAIO Media plus software does not
work correctly even after the initial setup is
completed.
If the firewall function in commercially available
software is enabled on your computer, the VAIO
Media plus software may not work correctly even
after the initial setup is completed.
To use the VAIO Media plus software with the
firewall function enabled, you need to configure the
computer to allow a server device and a client device
to be connected to the network.
For commercially available firewall software
Change the settings on your firewall software to
allow the following executable files to be run. For
detailed instructions on how to change the settings,
refer to the “Help” of the VAIO Media plus software
or the operating manual supplied with the firewall
software.
Executable files for VAIO Media plus:
VMp.exe, SOHCImp.exe, SOHDms.exe, SOHDs.
exe
Port used for VAIO Media plus:
The port number is displayed in the Advanced
Settings window. The VAIO Media plus software
uses this port. (To display the Advanced Settings
window, select Sharing Settings in the VAIO Media
plus Detailed Settings window and click Advanced
Settings.)
Network connection
Manual connection
“Correct IP address is not assigned.” appears on
the display.
Make sure the network setting has been correctly
made (pages 18 to 21).
“An error occurred in security information.” or “An
error occurred while transferring security key.”
appears.
There was an information exchange failure between
the unit and the wireless router/wireless LAN access
point. Wait a while, and then do the setup again.
Place the unit and the wireless router/wireless LAN
access point close to each other and do the setup
again.
The unit cannot connect to the wireless network.
Wireless networks are influenced by electromagnetic
radiation emitted by microwave ovens and other
devices. Move the unit away from these devices.
Place the unit and the wireless router/wireless LAN
access point close to each other and do the setup
again.
Check the settings of the wireless router/wireless
LAN access point, and then do the setup again.
AOSS connection
This section assumes the use of an AOSS-
compatible wireless station/wireless router/wireless
LAN access point. You cannot set up an AOSS
connection without an AOSS-compatible wireless
station/wireless router/wireless LAN access point.
“No wireless station/access point in AOSS mode
found.” appears.
The AOSS button on the wireless router/wireless
LAN access point has not been pressed. Do the AOSS
setup again.
Place the unit and the wireless router/wireless LAN
access point close to each other and do the AOSS
setup again.