![background image](http://html.mh-extra.com/html/sony/nas-z200dir/nas-z200dir_operating-instructions-manual_1330164074.webp)
NAS-Z200DiR/Z200iR.GB.4-151-738-
12
(1)
GB
5
Secure the two Mounting Hook to the rear of the unit.
Secure the Mounting Hook to the rear of the unit temporarily, using the 4 screws (+PSW4 ×
12) supplied with the Wall-mount bracket SU-WL100.
Be sure that screws are tightened securely with equal torque strength to the rear of the unit.
Screw (+PSW4 × 12)
Mounting Hook
Soft cloth
CAUTION
Be sure not to use any screws other than the ones supplied (+PSW4 × 12) when securing the Mounting Hook.
Make sure that the Mounting Hook angle is set at 0 degrees, and install the unit parallel to the wall. Do not adjust
the Mounting Hook angle.
6
Connect the cable(s) to the unit.
Connect the cable(s) to the connectors on the unit. For details on cable(s), refer to “Connecting the
antennas and power cord (main unit)” (page 13).
WARNING
Be careful not ot stumble over the power cord or connecting cable(s), as you may hurt yourself.