Sony NAS-Z200DIR Operating Instructions Manual Download Page 38

Page: 38 / 84

NAS-Z200DiR/Z200iR.GB.4-151-738-

(1)

For details on the compatible USB devices, refer to

the customer support site of Sony Europe,

http://support.sony-europe.com/

Notes



When USB cable connection is necessary, connect the

USB cable supplied with the USB device. Refer to the

operating manual supplied with the USB device for

details on the operation method.



It may take about 10 seconds before “Reading” appears

depending on the type of USB device connected.



Do not remove the USB device during transfer,

recording or erase operations. Doing so may corrupt

the data on the USB device or damage the USB device

itself.



Do not connect the unit and the USB device through a

USB hub.



When the USB device is connected, the unit reads all

the files on the USB device. If there are many folders or

files on the USB device, it may take a long time to finish

reading the USB device.



When you select [Record to USB] to perform

transferring/recording operation, the unit will re-check

the USB device. Re-checking may take a while for

the USB device to be ready for transfer/recording.

Therefore, make sure to select [Record to USB] ahead

of when playback or the radio program is due to start.

This will ensure the USB device is ready and in stand by

for when you want to start transferring/recording.



With some connected USB devices, there may be a

delay after an operation is performed.



Compatibility with all encoding/writing software,

recording devices, and recording media cannot be

guaranteed. Incompatible USB device may produce

noise, interrupted audio, or may not play at all.



This unit cannot transfer/record audio data from an

audio source or play audio files on the USB device in

the following cases.

— When the number of audio files in a folder exceeds

150.

— When the number of folders on a USB device

exceeds 1,000 (including the “ROOT” and the

“MUSIC” folders).

— When the number of files on a USB device exceeds

3,000. These numbers may vary depending on the

file and folder structure. Do not save other types of

files or unnecessary folders on a USB device that

has audio files.

Before using a USB device with this unit

Summary of Contents for NAS-Z200DIR





















































































Search results

Summary of Contents for NAS-Z200DIR

Reviews:

Related manuals for NAS-Z200DIR

Brands by name

Popular brands

Sony NAS-Z200DIR, Operating Instructions Manual

Search results

Summary of Contents for NAS-Z200DIR

Reviews:

Related manuals for NAS-Z200DIR

Brands by name

Popular brands