NAS-Z200DiR/Z200iR.GB.4-151-738-
12
(1)
GB
Oper
ations
Tip
If the standby mode is set to “Quick Start-up”, the track on
the computer that was playing when the unit is turned off
will start playing again when the unit is turned on again.
(The standby mode is factory set to “Power Save”. To save
the information of the last track played even when the
unit is turned off, change the standby mode to “Quick
Start-up”. For details on standby mode setting, see page
49.)
Notes
Tracks that the unit cannot play appear in the display as
well. You cannot sort a list of playable tracks.
Tracks that cannot be played on the unit appear gray in
the list and are skipped during playback.
If the connected server contains a large amount of
audio data, it may take a while for the display to change
while the unit is searching for a track.
Some or all of the tracks may not be found on the
connected server immediately after the VAIO Media
plus software is installed. In this case, wait a few
minutes and do step 2 again to select the server.
Other operations
To
Do the following
Pause playback
Press
during playback.
Press
again to resume
playback.
Find a point in a track Press and hold
/
during
playback and release it at
the desired point.
Go to the beginning
of the current track,
previous track, or
next track
Press
/
repeatedly.
Reselect the item you
want to play
Press BACK repeatedly
until the desired directory
appears.
To go back to the playback
display, press BACK
repeatedly until reaching
the highest directory, press
/
to select [To playback
display], and then press
ENTER.
To change the play mode
You can change the play mode during playback or
play-paused.
Press OPTIONS to enter the Options menu, select
[Play Mode], and then select the desired play
mode.
Play mode
Description
Continue
The unit plays all tracks in the
selected item (album, artist, etc.) in
sequential order.
All Repeat
The unit plays all tracks in the
selected item (album, artist, etc.)
repeatedly.
1 Repeat
The unit plays the currently
selected track repeatedly.
Shuffle
The unit plays the tracks in the
selected item (album, artist, etc.) in
random order.
Shuffle Repeat
The unit plays the tracks in the
selected item (album, artist, etc.) in
random order repeatedly.
(
: Factory setting)
To change a server
When you want to change to a different server, do
the following procedure.
1
Enter the Home Network function from
the Home menu.
2
Press BACK repeatedly until reaching
the highest directory.
3
Press
/
/
/
to display [Select
server] in a list, and then select [Select
server].
