NAS-Z200DiR/Z200iR.GB.4-151-738-
12
(1)
0
GB
Tracks or folders on the USB device cannot be
erased.
Check if the USB device is write-protected.
The USB device was disconnected or the power
was turned off during erase operation. Delete the
partially-erased track. If this does not solve the
problem, the USB device may be damaged. Refer
to the operating manual of the USB device for how
to deal with this problem. If the problem persists,
contact your nearest Sony dealer.
There is no sound.
The USB device is not connected correctly. Turn off
the unit, turn on the unit again, and then reconnect
the USB device.
There is noise, sound skipping, or distorted
sound.
Turn off the unit, then reconnect the USB device.
The music data itself contains noise. Noise may have
entered during the transfer/recording process. Delete
the file, and try transferring/recording again.
The USB device cannot be connected into the
(USB) connector.
The USB device is being connected backwards.
Connect the device in the correct orientation.
“Reading” is displayed for an extended time, or it
takes a long time before playback starts.
The reading process can take a long time in the
following cases.
There are many folders or files on the USB device.
The file structure is extremely complex.
The memory capacity is very large.
The audio files are damaged.
The internal memory is fragmented.
Erroneous display
Transfer/record the track to the USB device again,
as the data stored in the USB device may have been
corrupted.
The character codes that can be displayed by this
unit are numbers and alphabet only. Other characters
are not displayed correctly.
Playback does not start.
You are using an unsupported USB device.
Only tracks in the MP3 (“.mp3”)*
1
, WMA (“.wma”)*
1
and AAC (“.m4a”, “.3gp”, “.mp4”*
2
)*
1
format can be
played by this unit. Tracks in other formats cannot
be played (page 39).
*
1
Tracks with copyright protection (Digital Rights
Management) cannot be played by this unit.
Tracks downloaded from Internet websites
(including online music stores) may not be played
by this unit.
*
2
Only audio files can be played by this unit. Movie
files cannot be played.
Turn off the unit, then reconnect the USB device,
and then turn on the unit.
Playback does not start from the first track.
Shuffle play or shuffle repeat play is selected. Set the
play mode to normal (page 40).
Tracks cannot be played back.
Only tracks in the MP3 (“.mp3”)*
1
, WMA (“.wma”)*
1
and AAC (“.m4a”, “.3gp”, “.mp4”*
2
)*
1
format can be
played by this unit. Tracks in other formats cannot
be played (page 39).
*
1
Tracks with copyright protection (Digital Rights
Management) cannot be played by this unit.
Tracks downloaded from Internet websites
(including online music stores) may not be played
by this unit.
*
2
Only audio files can be played by this unit. Movie
files cannot be played.
USB device formatted with file systems other than
FAT16 or FAT32 are unsupported.*
3
*
3
This unit supports FAT16 and FAT32, but some
USB device may not support all of these FAT. For
details, see the operating manual of each USB
device or contact the manufacturer.
