7
Chapter 1 Introduction
Chapter
1
Introduction
Overview
LIB-162 is an AIT (Advanced Intelligent Tape) library with a built-in AIT
drive. Up to 16 cartridge volumes can be set and used. You can set and use up
to 16 cartridges at once. The unit can also be connected to, and used with, a
workstation or server.
Up to 16 cartridge volumes can be set
Up to 16 AIT cartridge volumes can be set. Cartridges can be replaced from the
front panel. Since the AIT library has a built-in bar code reader, bar code labels
can be used to manage cartridges. The following types of cartridges can be used
in this library:
• AIT-3 Cartridge: records up to 3.2 terabytes of data
• AIT-2 Cartridge: records up to 1.6 terabytes of data
• AIT-1 Cartridge: records up to 1.1 terabytes of data
Notes
• Cartridges that can be used vary according to the type of built-in drive.
• The memory capacity mentioned above assumes a data compression ratio of
2:1.
Up to two AIT drives can be installed
Up to two AIT drives can be installed and used. (One AIT drive is preinstalled.)
Since AIT drives are hot-swappable units, they can be added or replaced even
while the power is on. If you want to install an additional AIT drive, please
contact your dealer.
The AIT library can be remotely controlled
A browser can be used to configure individual settings. It can also be used to
view library and maintenance information.
Ultra Wide LVD SCSI compliant
The AIT library is Ultra Wide LVD SCSI compliant.
Suitable for rack mounting
With the rack mounting kit, ACY-RK2 (sold separately), the AIT library can be
installed on an EIA_STANDARD 19-inch rack. Rack mounting kits are
available from your dealer.
