13
Chapter 2 Installation
Chapter
2
Installation
Overview
This chapter explains general procedures for positioning the AIT library,
connecting it to the host computer and turning on the library power. This chapter
also explains initial set-up. Installation and set-up steps may vary depending on
your system.
After turning on the power, make settings required to use the unit as explained
in “Initial Setup” (page 22).
Unpacking
Note
You will need the box, packing materials, transport lock and transport screw if
you wish to move or transport the AIT library in the future. Retain them for
future use.
1
Remove the AIT library from the box as indicated on the box.
Remove the packing materials, such as plastic covers and tapes.
