63
Chapter 6 Using the Library Administration Menu
Library Administration Menu
When the Library Administration Menu is accessed using a browser, the
following objects can be accomplished through the browser:
• Configure system-related settings
• Configure network-related settings
• Configure SCSI ID-related settings
• Set or change the password
• Update the firmware
• Check the operation condition
• Check the AIT library
• View the AIT library and AIT drive information
• View logs
Library Administration Menu
Use the browser to operate the Library Administration Menu.
1
Launch a browser on a client computer.
2
Enter “http://XXX.XXX.XXX.XXX/” in the “Address” or “Location”
field.
For “XXX.XXX.XXX.XXX”, enter the IP address set in the server.
(e.g., 192.168.0.1)
Note
If the IP address assigned by a DHCP server is being used, enter the current
IP address in the “Address” field of the browser, and then click “Submit”.
The current IP address can be checked with “Network” on the Configuration
Menu. For Information about how to check, refer to “Operation example”
(page 37) in “Control Buttons” in Chapter 3, “Basic Usage”.
The top page of the Library Administration Menu appears.
