28
Chapter 2 Installation
“Insert Tape?” appears.
7
To set another cartridge, press the v
or V button, then press the
[ENTER] button.
The element address settings
display reappears. Insert the
cartridge in the same manner as
above.
8
When all the cartridges are set,
press the B button, then press the
[ENTER] button.
The shutter closes and the LED dims.
9
Press the [CANCEL] button twice to return to the status display.
Connecting to the Network
If the AIT library is connected to the network, a browser can be used to
configure the library and view status information.
Connect the AIT library to the network as follows.
1
Setup the network.
2
Connect a network cable.
3
Access the library from a browser.
Notes
• For information about how to use the browser to configure individual settings
and view status information, refer to Chapter 6, “Library Administration
Menu” (page 63).
• In order to configure and maintain the library through a browser, browser
software must be installed in the computer. Operating systems and browsers
that are compatible with this library are as follows.
Operating systems:
- Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows Me,
and Microsoft Windows 2000
Browsers:
- Microsoft Internet Explorer 5.01 or later
- Netscape Communicator 4.7 or later
Library 01
Insert Tape?
to set
to exit
to set
Insert Tape
12:34
Library 01
Insert Tape?
to set
to exit
to set
[ENTER] to activate
Insert Tape
12:34
Library 01
Insert Tape?
to set
to exit
to set
[ENTER] to activate
Insert Tape
12:34
