52
Chapter 4 Operating the AIT Library
7
To remove another cartridge, press
the v or V button, then press the
[ENTER] button.
The element address settings
display reappears. Remove the
cartridge in the same manner as
above.
8
When all the cartridges are
removed, press the B button, then
press the [ENTER] button.
The shutter closes and the LED dims.
9
Select “3.Insert Into Library”, then
press the [ENTER] button.
“Insert Tape” appears.
10
Use the V and v buttons to set the element address of the slot where the
cartridge is going to be set, then press the [ENTER] button.
11
When “[ENTER] to activate”
appears, press the [ENTER] button.
The cartridge dock shutter opens,
and the LED next to the specified
slot is lit.
12
Insert the cartridge into the slot next to the illuminated LED.
Library 01
Eject Tape?
[ENTER] to activate
Eject Tape
12:34
Library 01
Eject Tape?
to set
to exit
to set
[ENTER] to activate
Eject Tape
12:34
1.Eject From Library
2.Eject From Drive
3.Insert Into Library
Eject/Insert
12:34
Library 01
Insert Tape
12:34
Library 01
[ENTER] to activate
Insert Tape
12:34
