58
Chapter 5 Operating the AIT Drive
The AIT drive information is
displayed.
4
Press the [CANCEL] button twice to return to the status display.
Cleaning the AIT Drive
When the AIT drive needs to be cleaned, the following message appears on the
LCD panel:
Clean the drive by setting the cleaning cartridge in the AIT drive. To set the
cleaning cartridge, specify the slot and the AIT drive with an element address.
For information about element addresses, refer to “Assigned Element
Addresses” (page 45) in Chapter 3, “Basic Usage”.
Note
First set the cleaning cartridge in the AIT library, then move it to the AIT drive.
Check in advance which slot is not occupied. For information about how to
check, refer to “Viewing Cartridge Information” (page 55) in Chapter 4,
“Operating the AIT Library”.
1
At the status display, press the [MENU] button for 0.5 second.
2
Press the V button five times to select “6.Eject/Insert Tape”, then press the
[ENTER] button.
“Eject/Insert” appears.
3
Select “3.Insert Into Library”, then
press the [ENTER] button.
V/ID SONY
Name SDX-500C
S/N 12345678
Version 010C
Drive1
12:34
Cleaning Request
Warning
12:34
1.Eject From Library
2.Eject From Drive
3.Insert Into Library
Eject/Insert
12:34