8
Chapter 1 Introduction
Product Features and Functions
Front
A
Front Panel
B
Power Indicator LED
This LED light is on when the power is turned on.
C
Power Standby Switch (Home Position Switch)
Hold for five seconds or more to move the library's internal mechanism to its
designated position or turn the power on or off.
(When preparing to move the device, turn it off with this switch, then set the
transport lock and transport screw in place on the bottom.)
D
Cartridge Dock
Load and exchange cartridges in the cartridge dock. When the cartridge dock is
specified using the control buttons, its shutter opens automatically. The library
does not operate while the cartridge dock shutter is open, so close the shutter
using the control buttons after loading or exchanging cartridges.
E
Cartridge Select LED
When loading or exchanging cartridges, the Cartridge Select LED light is on
next to the slot that you select with the control buttons. (There are two slots: an
upper one and a lower one.) Cartridge operations affect the cartridge in the slot
whose LED is lit.
F
Liquid Crystal Display
The LCD panel displays information such as the operating status. When in
normal standby state, it displays the status of the AIT library.
G Error LED
This LED light is on when an error occurs.
H Control Buttons
These buttons are used to control operations through the Control Panel Menu.
I
Ventilation Holes
Please be careful not to block the ventilation holes. If the ventilation holes are
blocked, the AIT library may overheat, resulting in fire or other damage.
C A N C E L
E N T E R
M E N U
ERROR
STAND BY
1
4
5
3
2
6
7
8
9
