11
Chapter 1 Introduction
System Structure
Generally, the library is connected to the host computer and used to control the
library from the host computer. Also, you can connect the library to the network
so that it can be configured and maintained through a browser.
Notes
• A SCSI host adapter card must be installed in the host computer.
• In order to configure and maintain the library through a browser, browser
software must be installed in the computer. Operating systems and browsers
that are compatible with this library are as follows.
Operating systems:
- Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows Me,
and Microsoft Windows 2000
Browsers:
- Microsoft Internet Explorer 5.01 or later
- Netscape Communicator 4.7 or later
Cartridges
This section describes used in the AIT library.
AIT Cartridge
AIT cartridges for AIT-3, AIT-2 and AIT-1 drives can be used in the AIT
library. To achieve the maximum transfer rate and recording capacity, use the
optimum cartridges for the type of AIT drive installed. For information on
recording capacities, refer to “Hardware Specifications” (page 85) in the
“Appendix” chapter.
Ethernet
Wide SCSI
LIB-162
Control the
library.
Make library settings and
perform maintenance.
Host computer