Sony DVS-7250, Operation Software

Page: 469 / 542

Chapter 14 Setup
14-61
b) Setting the linkage of the transition type selection buttons and the
FlexiPad
Select whether or not pressing one of the WIPE, DME1, and DME2
transition type selection buttons in the transition control section of an
M/E bank causes the WIPE button or DME button in the FlexiPad of
the same M/E bank to light automatically.
MODE1: Lights automatically. (Factory default setting.)
MODE2: Does not light.
c) Setting the method of selecting the reference channel in the
numeric keypad section
Select the method of making the corresponding sub-register selection
button light green when selecting the reference channel in the numeric
keypad section.
MODE1: Hold down the SNAPSHOT button or EFF button, and
press the corresponding sub-register selection button to cause it to
light green. (Factory default setting.)
MODE2: Press a sub-register selection button which is off or lit
amber to select the corresponding sub-register as the reference
channel. To cancel the reference channel selection, press the
button lit green, turning it off.
d) Setting the linkage between snapshot recall from the numeric
keypad section and the FlexiPad
After a snapshot has been recalled using the numeric keypad section,
select whether or not the register number selection is reflected in the
FlexiPad of the corresponding
M/E bank.
MODE1: Not reflected. (Factory default setting.)
MODE2: Reflected.
e) Making the settings relating to the lighting of buttons when the
same signal is assigned to more than one cross-point button
Select the mode of button lighting to be used when one of the buttons
to which the same signal has been assigned is pressed.
MODE1: Of the buttons to which the same signal has been assigned,
only the button of the smallest number lights. (Factory default
setting)
MODE2: All the buttons to which the same signal has been assigned
light.