Sony DVS-7250, Operation Software

Page: 344 / 542

9-16
Chapter 9 Registers
Basic Register Operations
Selecting the Sub-Registers in the “USER” Group
To select the sub-registers in the “USER” group, use the following procedure.
1
In the REGISTER menu, select item 4 (CONFIG USER).
The function key indications change to correspond to the sub-registers
which can be included in the “USER” group.
2
Use F1 to F4 to select the sub-registers in the “USER” group.
The sub-registers selected are shown in reverse video.
F1 (FRAME MEM 1): frame memory 1
F2 (FRAME MEM 2): frame memory 2
F3 (CCR): color correction
F4 (AUX BUSES): AUX1 to AUX28 buses, edit preview bus or
destinations for the routing switcher to be controlled via the BKDS-
7700
Channel-to-Channel Copying of DME Registers
To copy DME registers from one channel to another, use the following
procedure.
1
In the REGISTER menu, select item 5 (CH COPY).
A menu for the channel-to-channel copy appears.
2
Depending on what you wish to copy, press one of F1 to F3, turning it on
(reverse video).
F1 (EFFECT): key frame effect registers
F2 (SNAPSHOT): snapshot registers
F3 (SETUP): currently used setup data
3
Press F4 (FROM CH), to select the source DME channel.