Sony DVS-7250, Operation Software

Page: 21 / 542

Chapter 1 Overview
1-11
Switch S3 (TEST): 0
Switch S4
Terminal setting initialization
After making the above switch settings, be sure to carry out the following
procedure.
If a backup CPU board is installed, carry this out with one CPU board
removed, and carry out the same procedure for each of the CPU boards.
1
Set the rotary switch S3 (TEST) on the CPU board to the D position.
2
Press the RESET button, to initialize the settings.
3
Return the rotary switch S3 (TEST) on the CPU board to the 0 position.
Once the procedure has been completed for both boards, reinstall the boards
as originally.
HDS-X3600
CPU board switch settings
Switch S1 (STATION ADDRESS)
The above settings are for the case in which the “Station No.” is 2.
Bit No Setting
1(SYNC/ASYNC) OFF(SYNC)
2(M/S) OFF(S)
3(TERMINAL/ISR) OFF(TERMINAL)
4 OFF
Bit No Setting
1 0(CLOSE)
2 1(CLOSE)
3 0(CLOSE)
4 0(CLOSE)
5 0(CLOSE)
6 0(CLOSE)
7 0(CLOSE)
8 0(CLOSE)