Sony DVS-7250, Operation Software

Page: 468 / 542

14-60
Chapter 14 Setup
Setup Relating to Operations From the Control Panel
(OPERATION Menu)
• Setting custom modes: You can make the following custom settings for the
operating mode of parts of the control panel.
a) Switching the operating mode of the FlexiPad
You can switch the operating mode of the FlexiPad in each of the M/E
banks.
MODE1: Factory default operating mode. For details see page 7-11.
MODE2: This changes the operation of snapshot recall as follows.
To specify register numbers 1 to 9
1
Press the SNAPSHOT button, which lights amber.
2 Press one of the numeric keys 1 to 9.
To specify register numbers 10 to 19
1
Press the SNAPSHOT button, which lights amber.
2 Press the SHIFT button, which lights amber.
3 Press one of the numeric keys 0 to 9; the SHIFT button goes off.
To specify register numbers 20 to29
1 Press the SNAPSHOT button, which lights amber.
2 Hold down the SHIFT button, and press the 2 numeric key; the
SHIFT button lights green.
3
Press one of the numeric keys 0 to 9.
4 To subsequently specify another register in the range 20 to 29, with
the SHIFT button lit green, press one of the numeric keys 0 to 9
again.
In step 2 , press 3 to 9 in place of 2 in order to specify a register in the
range 30 to 99.
To return to the state in which one of registers 0 to 19 can be
specified, press the SHIFT button lit green, turning it off.
MODE3: The following procedure shows how to specify a register
from 10 to 19. Other operations are the same as for MODE2.
To specify a register from 10 to 19
1 Press the SNAPSHOT button, which lights amber.
2 Press the SHIFT button, which lights amber.
3
Press the desired key from “0” to “9”. The SHIFT button lights.