Sony DVS-7250, Operation Software

Page: 123 / 542

Chapter 4 Basic Operations for Image Creation
4-45
3
Adjust the parameter settings as necessary.
When you selected border, drop border or shadow in step
2
, when F9
(MATTE) is on (a color matte is selected as the edge fill), you can adjust
the parameters for matte 1 regardless of whether the color mix function is
on or off.
The parameter adjustment method depends on the optional board used,
BKDS-7270 or BKDS-7271.
• Parameter adjustments with the BKDS-7270 installed
When applying a border:
a) For a pattern key the Position setting is not available.
b) For the relationship between the code numbers, 0 to 8, and the position, see page 4-33.
When applying a drop border or shadow:
a) For the details of “4H DROP ON” and “4H DROP OFF” mode, see “Edge types and key
fill/key source positions” (page 4-49).
b) For the relationship between code numbers and positions, see page 4-34.
Knob Parameter Setting
1 Width
Knob Parameter Setting
1 Width Set width (0 to 4; for a pattern key: 0.00 to 100.00)
2 Position
a)
Set position (0 to 8)
b)
4 Density Set density (0.00 to 100.00)
1 Luminance Set luminance (0.00 to 100.00)
2 Saturation Set saturation (0.00 to 100.00)
3 Hue Set hue (0.00 to 359.99)
4 Density Set density (0.00 to 100.00)
Set width (in “4H DROP ON” a) mode: 0 to 4; in “4H
DROP OFF”
a)
mode: 0 to 8)
2 Position Set position (in “4H DROP ON”
a)
mode: 1 to 8
b)
; in
“4H DROP OFF” a) mode: 1 to 3 b) )
4 Density Set density (0.00 to 100.00)
1 Luminance Set luminance (0.00 to 100.00)
2 Saturation Set saturation (0.00 to 100.00)
3 Hue Set hue (0.00 to 359.99)
4 Density Set density (0.00 to 100.00)
(Continued)