Sony DVS-7250, Operation Software

Page: 420 / 542

14-12
Chapter 14 Setup
Setup Relating to the Overall Switcher System (SYSTEM Menu)
Assigning a cross-point assignment table to a port
You can assign any of the five cross-point assignment tables to each of the
9-pin ports on the rear panel. By default table 1 is assigned to all of the
9-pin ports.
1
In the SYSTEM CONFIGURATION menu, press F10 (MLT XPT
ASSIGN).
The MULTI XPT ASSIGN menu appears.
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
1
TABLE
SELECT SELECT
PORT
SELECT
2 3 4 5
XPT ASSIGN SETUP
#2 #3
Function key indications in the MULTI XPT ASSIGN menu
2
Press F1 (PORT SELECT) or turn control knob 2 to align the cursor with
the required 9-pin port.
3
Press F4 (TABLE SELECT) or turn control knob 3 to align the cursor
with the required table number.
4
Press F3 (SELECT).
This assigns the table to the port.
Repeat steps
2
to
4
as required to assign tables to all of the ports.