Sony DVS-7250, Operation Software

Page: 343 / 542

Chapter 9 Registers
9-15
3
Press the function key for the attribute you wish to change.
To operate F11 to F16 to display the attributes of auxiliary bus sub-
registers, hold down the SHIFT button in the menu control section and
press F1 to F6.
When adding a dissolve effect to the DME
Press F6 (DURATION) and enter the dissolve duration from the numeric
keypad.
Setting a GPI output attribute
To set a GPI output attribute, use the following procedure.
1
Use the cursor movement buttons ( M m < , ) to align the cursor with
the “GPI” column of the register to which you wish to apply the GPI
output attribute.
Function key indications for GPI output setting appear.
2
Press F1 to F8 to select the corresponding GPI port to apply the GPI
output attribute. To delete a setting, press F9 (OFF).