Sony BVW-55, Maintenance Manual

Page: 345 / 942

5-3
BVW-55 P2
3. Tape cleaner
c
Never contact the tape cleaner placed between full erase head and CTL head with bare hand.
It is danger of cutting your finger because the tape cleaner has a sharp edge.
Pay careful attention when adjusting the CTL head and so on.
4. Tools and other equipment
Tools
.
Tape guide adjustment driver (45): J-6322-420-A
.
Inspection mirror: J-6080-840-A
.
Torque cassette (FWD back ten.) (MW-389): J-6323-890-A
. Parallel pin (d = 2.0 mm): 3-703-358-04
.
Torque screwdriver bit (for M1.4): J-6325-110-A
.
Nutdriver (s = 4.5 mm): 7-700-751-01
.
Torque screwdriver (3 kg
.
cm): J-6325-400-A
.
Cleaning cloth (15 cm
x
15 cm): 3-184-527-01
. Cleaning liquid: 9-919-573-01
. Screw locking compound: 7-432-114-11
.
Alignment tape, CR2-1B: 8-960-096-01
.
Alignment tape, CR8-1A (Oxide): 8-960-097-45
n
Refer to Section 1-4 about the contents of the alignment tapes.
Other Equipment
.
Betacam tape, BCT-30MA (Commercially available)
. Oscilloscope (Tektronix 2465B or equivalent)
. DC power supply (AC-550/550CE or equivalent)
(The AC adaptors AC-500 and AC-DN1 cannot be used to derive power.)
.
Weight about 1000 g (It is smaller than S type cassette tape in size.)
.
Bamboo stick
5-1. General Information on Tape Path Adjustment
Tape cleaner