Sony BVW-55, Maintenance Manual, Page: 289 / 942

4-17
BVW-55 P2
*
Precision
PWH1.4
x 3.5
PTP2.6
x
5
Precision
PWH1.4
x 3.5
Precision
PWH1.4
x 3.5
Precision
PWH1.4
x 3.5
Precision
PWH1.4
x 3.5
Precision
PWH1.4
x 3.5
S cather
T catcher
Never turn or
remove this
screw
Never turn or
remove
this screw
*
Full top senser
4-5. S/T Slider Replacement
Tools
. Stop washer fastening tool: J-6323-530-A
.
Torque screwdriver (3 kg
.
cm) : J-6325-400-A
.
Torque screwdriver bit (for M1.4): J-6325-110-A
.
Torque screwdriver bit (for M2): J-6325-380-A
.
Parallel pin (d = 1.6 mm): 3-649-266-01
. Parallel pin (d = 2.0 mm): 3-703-358-04
Replacement
1. VH cleaner assembly removal
Remove the VH cleaner assembly.
(Refer to Section 3-6.)
2. Pinch arm assembly removal
Remove the pinch arm assembly.
(Refer to Section 3-7.)
3. Drum assembly removal
Remove the drum assembly.
(Refer to Section 3-5.)
4. T tension regulator arm removal
Remove the T tension regulator arm.
(Refer to Section 3-9.)
5. Tension regulator band removal
Remove the tension regulator band.
(Refer to Section 3-9.)
6. S tension regulator arm removal
Remove the two screws, and then remove the S
tension regulator arm. (Refer to Section 4-10.)
7. Full top sensor removal
Remove the screw, and then remove the full top
sensor.
8. S and T catchers removal
Remove the three screws respectively, and then
remove the S catcher, and T catcher.
n
Never turn or remove the screws (
*
) shown in the
figure.