Sony BVP-550, Maintenance Manual

Page: 262 / 924

3-4(E)
BVP-550
Page Item Settings Contents
GAIN SW LOW -3,
[0]
, 3, 6, 9, 12, Selects the gain value for each gain switch position.
18, 24, 30 dB (LOW, MIDDLE, HIGH)
MID -3, 0, 3, 6,
[9]
, 12,
18, 24, 30dB
HIGH -3, 0, 3, 6, 9, 12,
[18]
, 24, 30dB
WIDE SCREEN 16:9/4:3 MODE
[16:9]
, 4:3 Selects the aspect ratio for the video signal output.
(For OHB-550WS (This setting is valid only when the camera is used alone.)
/550WSP) * Corresponds the CCU‘s setting when the CCU is connected.
VF ASPECT
[AUTO]
, 4:3 Selects the aspect ratio for the viewfinder indication.
AUTO : Automatically selects according to the aspect ratio selected by
16:9/4:3 MODE on the WIDE SCREEN page.
4:3 : Selects 4:3 regardless of the 16:9/4:3 MODE setting.
4:3 SAFETY ON,
[OFF]
Selects whether the safety zone marker showing the 4:3 area is indicated
in the 16:9 mode, or not.
f)
16:9 ID ON VF ON,
[OFF]
Turns on and off the 16:9 indication in the 16:9 mode on the viewfinder
screen.
(This setting is valid only when the DISP switch is set to on or off.)
16:9 ID ON,
[OFF]
Selects whether the 16:9 indication is displayed on the internal color-bar in
ON BARS the16:9 mode, or not.
(This setting is valid only when the DISP switch is set to on or off.)
MON OUT BNC TEST OUT
[VBS]
, RM, VF Y Selects a video signal to be output at TEST OUT connector.
VBS : Color composite signal
RM
: The same as a signal ouput to RM-P9
Y : Y(monochrome) signal
RM/MON CHAR
[ON]
, OFF Selects whether character signals displayed on the viewfinder screen are
mixed with the VBS signal to be output to RM-P9, or not. Turning on is
convenient to operate the setup menu by RM-P9.
VBS LOCK ON,
[OFF]
Used to prevent misoperation by ENC/RGB switch.
ON
: ENC signal is output at TEST OUT connector regardless of ENC/
RGB switch setting.
OFF : A signal selected by ENC/RGB switch is output.
VF VIDEO MODE
[Y]
, MIX, NAM Selects a video signal to be output to the viewfinder.
Y
: Y=0.3R+0.59G+0.11B; The same as a camera output signal
MIX : Y=0.33R+0.33G+0.33B
NAM : Selects one of the R, G, and B signal that is maximum in level.
[RGB]-G ON,
[OFF]
Sets signals selectable by RGB switch.
ON
: R-G, B-G
OFF : R, G, B
AUTO IRIS IRIS OVERRIDE -99 to 99 (
[0]
) Sets the reference value for automatic iris adjustment.
AUTO KNEE (DCC) -99 (further closed)
↔
99 (further opened)
IRIS OVERRIDE ON,
[OFF]
Turns the auto-iris override function on and off.
APL RATIO -99 to 99 (
[0]
) Sets the way the iris is automatically adjusted.
-99 (PEAK)
↔
99 (AVERAGE)
AUTO KNEE -99 to 99 (
[XX]
) Sets the point on which the knee function starts to have effect in the auto-
POINT knee mode.
AUTO KNEE -99 to 99 (
[XX]
) Sets the volume of the effect of the knee function in the auto-knee mode.
SLOPE
3-1. Setup Menu