Sony BVP-550, Maintenance Manual

Page: 699 / 924

3-5(E)
BVP-550
Page Item Settings Contents
STAND ALONE H PHASE -99 to 99 (
[XX]
) Sets the horizontal phase of the camera in the genlock mode.
SC PHASE 0 to 360(
[XX]
) Sets the subcarrier phase of the camera in the genlock mode.
CABLE COMP ON,
[OFF]
Turns on and off the cable compensation circuit for the external sync
signal in the genlock mode.
SNG BARS ON,
[OFF]
Turns the color-bar signal for SNG on and off.
MASTER BLACK -99 to 99 (
[0]
) Adjusts the MASTER BLACK level.
IRIS OVERRIDE ON,
[OFF]
Turns the auto-iris override function on and off.
CF PULSE
[ON]
, OFF Turns on and off the color framing pulse supplied to the VTR.
SKIN DETAIL ON,
[OFF]
Turns the skin tone detail function on and off.
AUTO HUE Press MENU SEL Starts to automatically adjust the volume of effect of the skin detail auto
DETECT switch to execute. hue function. (Does not function at present.)
AUTO SETUP AUTO BLACK Press MENU SEL Starts to automatically adjust the black balance.
switch to execute.
AUTO WHITE Press MENU SEL Starts to automatically adjust the white balance.
switch to execute.
LEVEL AUTO Press MENU SEL Starts to automatically adjust the level in the internal circuits. c)
switch to execute.
TEST 1, 2,
[OFF]
Selects the test signal.
1
: Outputs the sawtooth waveform test signal
2 : Outputs 3-step waveform test signal
OFF : No test signal is output.
DIAGNOSIS OHB
[OK]
, NG Displays a state of communication for control data between the OHB block
and CPU on AT board.
PR
[OK]
, NG Displays a state of communication for control data between the PR board
and CPU on AT board.
VA
[OK]
, NG Displays a state of communication for control data between the VA board
and CPU on AT board.
AT
[OK]
, NG Displays a state of communication for control data between the CPU and
memory on AT board.
SG
[OK]
, NG Displays a state of communication for control data between the SG board
and CPU on AT board.
DA
[OK]
, NG Displays a state of communication for control data between DA board and
CPU on AT board.
IF
[OK]
, NG Displays a state of communication for control data between IF board and
CPU on AT board.
MD
[OK]
, NG Displays a self-diagnosis result of MD board (of camera adaptor).
AU
[OK]
, NG Displays a self-diagnosis result of AU board (of camera adaptor).
TR
[OK]
, NG Displays a self-diagnosis result of TR board (of camera adaptor).
CAMERA ID ID:
[] [] [] [] [] [] []
Sets a camera ID of up to ten alphanumerics, symbols, and spaces.
ID ON BARS ON,
[OFF]
Selects whether the camera ID is mixed with a camera output signal only
in the color-bar mode, or not.
(This setting is valid only when the DISP switch is set to on or off.)
c) When executing the LEVEL AUTO, data set through the menu is all cleared and the automatic level adjustment is performed in
sequence. After the adjustment is complete, adjustment result is stored as a reference file.
1. Lens is automatically closed and the black balance is automatically adjusted.
2. The white balance is automatically adjusted using TEST 2 (3-step) signal.
n
This white balance adjustment compensates a drift of the gain of an amplifier, does not compensate color temperature for an actual
object.
The gamma and knee compensation values do not change with a lapse of time because of the digital-processing camera.
Therefore, the LEVEL AUTO adjustment does not contain the gamma and knee adjustments unlike a conventional camera.
3-1. Setup Menu