Sony BVP-550 Maintenance Manual Download Page 101

Page: 101 / 924

5-1

BVP-550

BVP-550P

5-1. Notes on Repair Parts

Safety Related Components Warning

Components marked

are critical to safe operation. Therefore, specified parts should be used in the

case of replacement.

2. Standardization of Parts

Some repair parts supplied by Sony differ from those used for the unit. These are because of parts

commonality and improvement.

Parts list has the present standardized repair parts.

3. Stock of Parts

Parts marked with “o” at SP (Supply Code) column of the spare parts list may be not stocked.

Therefore, the delivery date will be delayed.

4. Units Representation

The following represented units are changed or omitted in writing.

Units

Representation

Capacitance

Inductance

Resistance

Ω

Abbreviation

5. Destination Representation

The part indicated “For UCJ/CE” in the spare parts list is used in the unit written below.

For UCJ : The part is used in a unit for Japan, U.S.A. and Canada.

For CE : The part is used in a unit for regions except the above countries.

Section 5

Spare Parts

Summary of Contents for BVP-550





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BVP-550

Reviews:

Sony BVP-550, Maintenance Manual, Page: 101 / 924

Search results

Summary of Contents for BVP-550

Reviews: