Sony BVP-550, Maintenance Manual, Page: 479 / 924

3-5(E)
BVP-550
Page Ver. Item Settings Contents
STAND H PHASE -99 to 99 (
[XX]
) Sets the horizontal phase of the camera in the genlock mode.
ALONE
SC PHASE 0 to 360(
[XX]
) Sets the subcarrier phase of the camera in the genlock mode.
CABLE COMP ON,
[OFF]
Turns on and off the cable compensation circuit for the external sync
signal in the genlock mode.
SNG BARS ON,
[OFF]
Turns the color-bar signal for SNG on and off.
MASTER BLACK -99 to 99 (
[0]
) Adjusts the MASTER BLACK level.
IRIS OVERRIDE ON,
[OFF]
Turns the auto-iris override function on and off.
CF PULSE
[ON]
, OFF Turns on and off the color framing pulse supplied to the VTR.
SKIN DETAIL ON,
[OFF]
Turns the skin tone detail function on and off.
1.10 AUTO HUE Press MENU SEL Sets the skin detail hue function automatically.
switch to execute. (Locate the desired skin color within the gate marker of VF and measure.)
AUTO AUTO BLACK Press MENU SEL Starts to automatically adjust the black balance.
SETUP switch to execute. (To abort a processing during execution, press MENU SEL switch.)
AUTO WHITE Press MENU SEL Starts to automatically adjust the white balance.
switch to execute.
LEVEL AUTO Press MENU SEL Starts to automatically adjust the level in the internal circuits. c)
switch to execute. (To abort a processing during execution, press MENU SEL switch.)
TEST 1, 2,
[OFF]
Selects the test signal.
1
: Outputs the sawtooth waveform test signal
2 : Outputs 3-step waveform test signal
OFF : No test signal is output.
DIAGNOSIS OHB
[OK]
, NG Displays a state of communication for control data between the OHB
block and CPU on AT board.
PR
[OK]
, NG Displays a state of communication for control data between the PR
board and CPU on AT board.
VA
[OK]
, NG Displays a state of communication for control data between the VA
board and CPU on AT board.
AT
[OK]
, NG Displays a state of communication for control data between the CPU
and memory on AT board.
SG
[OK]
, NG Displays a state of communication for control data between the SG
board and CPU on AT board.
DA
[OK]
, NG Displays a state of communication for control data between DA board
and CPU on AT board.
IF
[OK]
, NG Displays a state of communication for control data between IF board
and CPU on AT board.
MD
[OK]
, NG Displays a self-diagnosis result of MD board (of camera adaptor).
AU
[OK]
, NG Displays a self-diagnosis result of AU board (of camera adaptor).
TR
[OK]
, NG Displays a self-diagnosis result of TR board (of camera adaptor).
c) When executing the LEVEL AUTO, data set through the menu is all cleared and the automatic level adjustment is performed in
sequence, After the adjustment is complete, adjustment result is stored as a master setup data.
1. A reference file which is reference for adjustment is loaded .
2. Lens is autmatically closed and the black balance is automatically adjusted.
3. The white balance is automatically adjust using TEST 2 (3-step) signal.
m
This white balance adjustment compensates a drift of the gain of an amplifier, does not compensate color temperature for an actual
object.
The gamma and knee compensation values do not change with a lapse of time because of the digital-processing camera.
Therefore, the gamma and knee compensation values remains the values stored in the reference file.
3-1. Setup Menu
3-1-1. Operation Menu