Sony BVP-550, Maintenance Manual

Page: 478 / 924

3-4(E)
BVP-550
Page Ver. Item Settings Contents
GAIN SW LOW -3,
[0]
, 3, 6, 9, 12, Selects the gain value for each gain switch position.
18, 24, 30 dB (LOW, MIDDLE, HIGH)
MID -3, 0, 3, 6,
[9]
, 12,
18, 24, 30dB
HIGH -3, 0, 3, 6, 9, 12,
[18]
, 24, 30dB
WIDE SCREEN 16:9/4:3 MODE
[16:9]
, 4:3 Selects the aspect ratio for the video signal output.
(For OHB-550WS (This setting is valid only when the camera is used alone.) b)
/550WSP)
VF ASPECT
[AUTO]
, 4:3 Selects the aspect ratio for the viewfinder indication.
AUTO: Automatically selects according to the aspect ratio selected by
16:9/4:3 MODE on the WIDE SCREEN page.
4:3 : Selects 4:3 regardless of the 16:9/4:3 MODE setting.
4:3 SAFETY ON,
[OFF]
Selects whether the safety zone marker showing the 4:3 area is
indicated in the 16:9 mode, or not.
a)
16:9 ID ON VF ON,
[OFF]
Turns on and off the 16:9 indication in the 16:9 mode on the viewfinder
screen.
(This setting is valid only when the DISP switch is set to on or off.)
16:9 ID ON,
[OFF]
Selects whether the 16:9 indication is displayed on the internal color-bar
ON BARS in the16:9 mode, or not.
(This setting is valid only when the DISP switch is set to on or off.)
MON OUT BNC TEST OUT
[VBS]
, RM, VF Y Selects a video signal to be output at TEST OUT connector.
VBS : Color composite signal
RM
: The same as a signal ouput to RM-P9
Y : Y(monochrome) signal
RM/MON CHAR
[ON]
, OFF Selects whether character signals displayed on the viewfinder screen
are mixed with the VBS signal to be output to RM-P9, or not. Turning on
is convenient to operate the setup menu by RM-P9.
VBS LOCK ON,
[OFF]
Used to prevent misoperation by ENC/RGB switch.
ON
: ENC signal is output at TEST OUT connector regardless of
ENC/RGB switch setting.
OFF : A signal selected by ENC/RGB switch is output.
VF VIDEO
[Y]
, MIX, NAM Selects a video signal to be output to the viewfinder.
MODE Y : Y=0.3R+0.59G+0.11B; The same as a camera output signal
MIX : Y=0.33R+0.33G+0.33B
NAM : Selects one of the R, G, and B signal that is maximum in level.
[RGB]-G ON,
[OFF]
Sets signals selectable by RGB switch.
ON
: R-G, B-G
OFF : R, G, B
AUTO IRIS IRIS OVERRIDE -99 to 99 (
[0]
) Sets the reference value for automatic iris adjustment.
AUTO KNEE -99 (further closed)
↔
99 (further opened)
(DCC)
IRIS OVERRIDE ON,
[OFF]
Turns the auto-iris override function on and off.
APL RATIO -99 to 99 (
[0]
) Sets the way the iris is automatically adjusted.
-99 (PEAK)
↔
99 (AVERAGE)
AUTO KNEE -99 to 99 (
[XX]
) Sets the point on which the knee function starts to have effect in the
POINT auto-knee mode.
AUTO KNEE -99 to 99 (
[XX]
) Sets the volume of the effect of the knee function in the auto-knee mode.
SLOPE
b) The change of aspect ratio using this menu is disabled because the CCU’ s setting has a priority when the CCU is connected.
If you want to change the aspect ratio when the CCU is connected, use the OTHERS page of the Paint menu. When you attempt to
change using this menu, a message “Use Paint MNU” is displayed.
3-1. Setup Menu
3-1-1. Operation Menu