Sony BVP-550, Maintenance Manual

Page: 508 / 924

4-18 (E)
BVP-550
2. Make a selection of line at the center white portion of
the grayscale chart.
3. Set the menu as follows, and adjust the white limiter
by using the MENU SEL switch.
MENU : Paint
PAGE : Detail 2 (P3)
ITEM : W.Limitter
Specifications
: Adjust the edges of portions B to the
desired clip level.
(Waveform Monitor)
4. Set the menu as follows, and adjust the black limiter
by using the MENU SEL switch.
MENU : Paint
PAGE : Detail 2 (P3)
ITEM : B.Limitter
Specifications
: Adjust the edges of portions C to the
desired clip level.
(Waveform Monitor)
4-2-15. Skin Tone Adjustment
Note:
• Perform this adjustment on the customer’s preferences, if
necessary.
Equipment
: Color monitor, Viewfinder or Vectorscope
Preparations:
• Connect the vectorscope to the TEST OUT connector.
• Shoot a person’s face.
• Set the DISP switch (on the side panel) to MENU while
holding down the MENU SEL switch (on the front
panel). Set the menu as follows.
MENU : Paint
PAGE : Skin Detail (P4)
ITEM : Skin Detail
→
On
Adjustment Procedures:
1. Set the menu as follows.
MENU : Paint
PAGE : Skin Detail (P4)
ITEM : Gate
→
On
2. Set the menu as follows, and adjust the amount of the
skin detail signal to the desired level according to the
following items by using the MENU SEL switch.
MENU : Paint
PAGE : Skin Detail (P4)
ITEM : Level (Detail level within the skin gate)
ITEM : Phase (Hue)
ITEM : Saturation
(Component in the saturation direction)
ITEM : Width (Component in the hue direction)
(The effective area of the skin detail signal appears in
a zebra pattern on the viewfinder screen. Set the
desired level.)
(Vectorscope)
4-2. Adjustment for Installation of OHB
4-2-14. Detail Clip Adjustment
4-2-15. Skin Tone Adjustment
Saturation
Phase
R-Y
B-Y
Width
Line Select