Sony BVP-550, Maintenance Manual

Page: 915 / 924

3-9(E)
BVP-550
Page Ver. Item Settings Contents
MATRIX G-R, B-R –99 to 99 (
[0]
) Compensates the user’s matrix (sets an optional value as the constant
R-G, B-G –99 to 99 (
[0]
)
for G-R, B-R, R-G, B-G, R-B, and G-B).
R-B, G-B –99 to 99 (
[0]
)
MATRIX
[ON]
, OFF Turns the matrix compensation on and off.
USER f)
[ON]
, OFF Turns the user’s matrix compensation on and off.
PRESET
f)
[ON]
, OFF Turns on and off only the preset matrix compensation (fixed constant
compensation).
TEST 1, 2,
[OFF]
Selects the test signal.
1
: Outputs the sawtooth waveform test signal
2 : Outputs 3-step form test signal
OFF : No test signal is output
CLEAR Press MENU SEL Sets all settings on the MATRIX page to 0.
switch to execute. (When you press MENU SEL switch, the “CLEAR” indication flashes.
Press MENU SEL switch again to execute; press CANCEL button to cancel.)
SCENE FILE 1 Storing and recalling a scene file (painting data corresponding to a shot scene)
2 Storing a scene file
3 1 Turn MENU SEL switch to move the
→
cursor to “FILE STORE,” then press MENU SEL
4 switch. “FILE STORE” flashes on the viewfinder screen.
5 2 Select the file number (1 to 5) to be stored to.
FILE STORE (If data is already stored at the selected location, the new data replaces the current data.)
Recalling a scene file
Turn MENU SEL switch to move the
→
cursor to the file number whose data is to be recalled,
then press MENU SEL switch.
• When MENU SEL switch is pressed, the scene file data replaces the current settings.
• When the scene file is recalled, an asterisk appears next to the number.
STANDARD Returns the current amount of paint adjustments and switch setting to their reference value
stored as a reference file.
SHUTTER 1.10 SELECT
[OFF]
, SHUTTER, Selects the shutter, EVS, or ECS mode. (Does not correspond to the
EVS, ECS setting of the SHUTTER switch in the camera front.)
1.10 SHUTTER
100
(or
60
),
125
,
250
, Selects the shutter speed.
500
,
1000
,
2000
1.10 ECS h) Sets the ECS (CLS) frequency.
1.10 S-EVS
[0]
to 100% Sets the desired resolution in %.
(This setting is invalid with the OHB-450/450P/451/451P installed.)
OTHERS 1.09 16:9/4:3 MODE
[16:9]
, 4:3 Selects the aspect ratio for the video signal output. i)
f) When both USER and PRESET are set to ON, the matrix constant compensation is total value of the USER and PRESET matrix.
h) Variable range differs depending on the OHB in use. For details refer to the operation manual supplied with the OHB.
i) The aspect ratio normally corresponds to the CCU’s setting when the CCU is connected. To forcefully select, use this menu.
1 1 1
1 1 1 1
3-1. Setup Menu
3-1-2. Paint Menu