10
5.
Installing the Free Standing Pellet Fire
Before you begin the installation, perform the following actions:
•
The recommended measures for installing the pellet insert are as follows:
Model
Width (mm)
Height (mm)
Depth (mm)
Fire 9Kw
695
550
550
Earth 9Kw
695
610
550
Wind 9Kw
695
550
550
•
As can be seen in figure 4 the inserts have finishing frames to cover bigger holes,
giving greater versatility to the insert. There are two different widths, one of 44 mm
and one of 74 mm to finish the equipment’s installation (see point 13).
•
The surface where the base of the equipment is to be fixed must be leveled and
have the necessary strength to support the entire weight of the equipment and its
subsequent movements to load pellets.
•
The base of the equipment has 7 holes to attach to the support.
Figure 5
–
Fixing base equipment
•
As can be seen in Figure 5, a distance of 62.5mm from the base to the front of the
wall must be left (it must be perfectly parallel).
•
The equipment has an approximate weight of 100 kg and when it is extracted to the
pellet / maintenance position, it exerts a high force on the base, during installation it is
necessary to use anchoring material suitable for the type of base, soil and wall (In the
case of extending table), recommendations:
Summary of Contents for EARTH 9KW
