SOLZAIMA EARTH 9KW, Instruction Manual

Page: 88 / 119

87
17.2. Installation of the frame on the equipment
With the fixed insert and the tripartite frame prepared, the next step is to assemble the
two. Open the safety catch of the insert, remove the insert to work comfortably. On
each side of the insert we have two screws (Din 967 M4x8mm), it is necessary to
slightly loosen these screws. (See Figure 50).
Figure 41 - Locating the screws to attach the frame to the insert
Insert the frame, aligning the insertable bolts with the frame flaps, insert the frame,
line up in front of the insert and tighten the screws again to secure the rim (See Figure
51). Place the insert in its operating position and close the two safety latches, if the
wall is sensitive to marks it is recommended to leave 1 or 2 mm distance between the
rim and the wall.