SOLZAIMA EARTH 9KW, Instruction Manual

Page: 31 / 119

30
Figure 27 – Auxiliary table assembly
5. To place the auxiliary table in its final position, remember that the table has to be
installed 62.5 mm from the front wall, as shown in the image. Then mark the four
holes of the legs on the floor, drill the holes, you must use the necessary means of
fixing as indicated previously. At the end the table should be fixed to the floor.
Figure 28 – Auxiliary table assembly
6. You should level the table as accurately as possible with the help of a level. Tighten
all screws with a 6mm umbrako wrench. Move the squares on the back wall and mark
the holes. Remove the brackets, if necessary, remove the screws and remove the
assembly to make it easier to drill holes in the wall. Once done is put the necessary
components to fix, place the brackets in place. Check that the table is level and that it
respects the height of 62.5 millimeters. The screws that secure the table brackets must
be tightened with a 6 mm umbrako table.