SOLZAIMA EARTH 9KW, Instruction Manual

Page: 22 / 119

21
Figure 14 – Installing the display outside the insert
1. Place the outer support plate, making it coincide with the markings done previously
as shown in the figure with the hole, mark the 4 holes where the screws pass.
Figure 15 – Installing the display outside the device
3. With the 5 holes open, the next step is to insert the back support plate to be fixed
from the inside of the wall.
Figure 16 – Installing the display outside the device
4. On the outside, place the front support plate to match the holes previously opened,
insert the screws 4x30mm DIN7991 until it is fully threaded, leaving the two pieces
together and the wall between them.