LC2000/LC2000-IQ/LC4000/LC4000-IQ
Operation Using the RollCall Control Panel
Issue 1 Rev 6
Page 94
© 2015 SAM
9.4 Unit Status Windows
The Unit Status windows at the top of each screen display information about the status of the
unit.
The Unit Status window on a system setup screen shows the IP address of the unit, the
reference status, and the software version.
The Unit Status window on a channel operation screen shows the current channel and the
input, output, and audio status.
The audio information line (shown here as Analog 2 PCM) cycles through the audio input
sources every few seconds, showing the status of each one in turn.
The audio status display information is as follows:
•
PCM: Audio is PCM
•
Mute: Audio is muted
•
Tone: Audio is a test tone
•
DolbyE: Audio is Dolby
•
Loss: Audio is unavailable or invalid
Note:
The Unit Status information is also present on the System screen and the Home screen on
the front panel.
